If you are wandering to build a Project with a pump and don’t know what will be the best pump for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your project.

This DC6-12V MINI Aquarium Water Pump R385 is the perfect choice for any project that requires water to be moved from one place to another.

This pump can be used in:

1. Small aquarium pump
2. Automatic plant watering system

This is a low cost mini submersible type water pump that works on 3-6V DC. It is extremely simple and easy to use. This Pump has one inlet valve and one outet valve. Connect the inlet valve to your water source and outlet valve to your desired location and power the motor with 3-6V to start pumping water.

Great for building science projects, fire-extinguishers, fire fighting robots, fountains, waterfalls, plant watering systems etc.

This motor is small, compact and light. It can be controlled from a micro controller/Arduino using our DC Motor Drivers or one of our Relay Boards. You may use our 5V SMPS Power Supply Adapter to run this pump. You may also use our 6V Solar Panel to run the pump with an appropriate 6V voltage regulator.

This pump can be used under submersible and non submersible conditions.

Compatible with most of rotary tools used in hardware,hobby,home,etc. Suitable for installation inside diameter of less than 3.0mm drill,electric grinding,hanging mill,hose above. Suitable for use with sheet iron, aluminum, copper, plastic etc. Comes with 5 different size to meet your need, Drill collet size: 05mm, 10mm, 15mm, 25mm, 30mm.

Drill chuck for 775 motors (5mm shaft) Strong impact resistance. Compatible with impact drill and different power electric drill. Clamping range: 1.5 mm-10 mm drill, the maximum clamping 10 mm. Adaptor Connection size: (inner hole diameter is 5 mm) for 775 motors, Drill, and woodworking machine. The shank with a screw can be tight and flexed for you. Maximum clamping fit motor shaft diameter 5.00 mm Package included: Drill chuck, 5 mm motor Adaptor, 2mm Allen key, Drill chuck key.

Housing material: Tough ABS Winding Material: Copper Power source: Battery / Power Supply 12 Volt DC Adapter 3 Amp Voltage: DC12V Power: 100W Working current: 4-6.5A Max Output / Suction / Suction Power: 8L/MIN Max pressure/ Bursting pressure of water: 150 PSI /10 BAR / 0.80Mpa Working: Continuous Heat Resistance: 0°C~60° Self-priming: 1M Inlet: 10mm hose Outlet: 18mm Screw Pump Size: 19cm(L) x 14cm(B) x 5cm(H) Pump Weight: 1.110 Kg NOTE: BBRG, Thermal Protected. Auto ON / OFF (The pump is equipped with an auto on / off switch, when the water output flow is closed the pump will automatically turn off, and vice versa when opened it will automatically turn on)

Housing material: Tough ABS Winding Material: Copper Power source: Battery / Power Supply 12 Volt DC Adapter 3 Amp Voltage: DC12V Power: 100W Working current: 4-6.5A Max Output / Suction / Suction Power: 8L/MIN Max pressure/ Bursting pressure of water: 150 PSI /10 BAR / 0.80Mpa Working: Continuous Heat Resistance: 0°C~60° Self-priming: 1M Inlet: 10mm hose Outlet: 18mm Screw Pump Size: 19cm(L) x 14cm(B) x 5cm(H) Pump Weight: 1.110 Kg NOTE: BBRG, Thermal Protected. Auto ON / OFF (The pump is equipped with an auto on / off switch, when the water output flow is closed the pump will automatically turn off, and vice versa when opened it will automatically turn on)

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on performance and durability while retaining the same affordability.

Redesigned from the ground up, the ECO II boasts an all-new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability.

Submersible Pumps are efficient for pumping out septic tanks. Fluid is transferred into hoses to storage tanks and taken to a treatment facility. Submersible pumps are often used to pump excess water from work sites or flooded basements on construction sites. They can also be used to pump slurries Submersible pumps are centrifugal pumps whose hydraulic components (pump casing, impeller, diffuser element) are flooded by the fluid handled. Usually, this type of pump is not fitted with a suction line. A submersible pump whose motor is arranged above the floor is referred to as a vertical shaft submersible pump