The name of this product itself is enough to explain its origin. Yes of course !!! this LCD module was used in old Nokia 5110/3310 cell phones. Now it’s been widely used by hobbyists for graphics, text, etc.

Though it’s an industrial module, this LCD display is extremely easy to use. The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended as a cell phone screen.

This Nokia 5110 LCD Module is mounted on an easy-to-solder PCB. The Nokia 5110 LCD Module uses a Philips PCD8544 LCD driver, which is designed for mobile phones.

This is a 1.3 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes a display board, display, 6 pin male header pre-soldered to board.

OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×2 Parallel LCD Display is a quite good solution. This is a Original JHD 16×2 Character LCD Display With Blue Backlight as there are many fake JHD Displays in the Market.

This is a great blue backlight LCD display. It is fantastic for Arduino based project. This LCD 16×2 Parallel LCD Display with Blue Backlight is very easy to interface with Arduino or Other Microcontrollers. This is LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project.

This is a popular and original JHD 16×2 LCD Display with Green backlight . It is based on the SPLC780D display controller which makes it is easy to interface with this 16×2 LCD with most micro-controllers. Its extreme popularity ensures that no matter which microcontroller platform you are using, you will definitely find ready libraries to use this 16×2 LCD Display.

If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 8 x 2 Parallel LCD Display is a quite good solution.

This is LCD 8 x 2 Parallel LCD Display that provides a simple and cost-effective solution for adding an 8 x 2 Black on RGB Liquid Crystal Display into your project. The display is 8 character 2 line display that has a very clear and high contrast black text upon a yellow background/backlight.

10.1-inch Resistive HDMI LCD display has an IPS display panel and a screen resolution of 1024 x 600. This display has a resistive touch-type screen and toughened glass hardness. The display supports Multiple mini-PCs such as Raspberry Pi, and BB Black, as well as general desktop computers. It also has an HDMI interface for display. Comes with an EU plug-type power adapter.

The TM1637 4 Bits Digital Tube LED Display Module is an affordable solution for displaying the output data of your Arduino project. Though the data displayed is restricted by numbers still it allows users to display some characters too like A, B, C etc.

This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Display Module. Also thanks to the I2C Bus you can control it using only 2 wires, leaving more pins available on your MicroController to connect other things.

This is a Waveshare 4.3 Inch Capacitive Touch LCD Display, 4.3inch diagonal, 800×480 pixels. It is able to display 16,777,216 colors via the 24-bit RGB interface, supports up to 5-points capacitive touch control via an I2C interface.