The high-performance 1555 2-blade Carbon Fiber CW/CCW Propeller was created especially for fans of T-Motors. These precisely constructed propellers will increase the effectiveness and power of your drone. They are made of tough carbon fiber for maximum performance and durability.

Achieving stable flight and fine control is simple with options for rotation in both the clockwise (CW) and counterclockwise (CCW) directions. Upgrade to the 1555 Carbon Fiber Propeller to elevate your T-Motor experience to new heights and enjoy the ideal marriage of innovation and excellence.

Key Points of Mixed Control Debugging:

l First make sure the forward and backward motors are in the same direction. (If a motor is turning incorrectly, exchange the +-stage wires behind the motor)

l Then adjust the direction, if it is not as expected, the remote control may be reversed, set it back

The Dual-mix ESC Has the Following Modes: 

l Mixed control mode (both throttle / steering mode): 2 or 3 channels (2 channels are recommended because 2 channels automatically return to center) to control the throttle, 1 channel (or 4 channels) to control speed difference steering, throttle ratio 100%, steering ratio 100%, steering priority. Suitable for: tank (in this mode, gun control can play tanks), 4-wheel drive trolley (apm can be installed)

l Two-way independent: it is equivalent to two independent ESCs (if you want to simulate a real tank, the white three wires on the input end are connected to the receiver throttle (3 channels), and the yellow single wire is connected to the receiver 2 channels)

l Two-way synchronization: In mixed control mode, do not connect a single yellow wire, so that the two-way motor output is consistent

This 20A Brushed Electronic Speed Controller is a small-sized ESC that can supply a current up to 20A by using a 2S lipo battery as an input. The ESC accepts a standard RC signal as input and offers functions as forward, reverse, and breaking. This ESC has high-quality silicone cables for the battery input and the motor output.

3-pin extension cable cord, female to male lead wire for servo extension connection control board remote control parts Female to male connectors: These servo connector wires have female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine. 3-Pin extension cable: The servo extension lead wires featured with 3 pins, and each has an angle, in case you will install incorrectly, convenient use design. Application: The servo extension wire kit can be applied for Futaba and JR style servo, remote control car, RC Car, plane and helicopter servo connection or receiver connection.

• FEATURES :

1. Signal System: PAL
2. Auto Gain Control(AGC)
3. Backlight compensation(BLC)
4. WDR D-WDR
5. DNR 2DNR
6. Day/Night Auto/Color/B*W
7. Electronic Shutter Speed PAL: 1/50-100.000

This module is a nice little relay switch controlled by a spare auxiliary channel on your receiver. Ideal for switching lights, sound, and any other auxiliary electrical items. When PWM duty is more than 1500us, the switch will turn on; when PWM duty is less than 1400us, the switch will turn off.

Standard BLDC 30 amp ESC Electronic Speed Controller with Connector is specifically made for quadcopters and multi-rotors. It provides faster and better motor speed control giving better flight performance compared to other available ESCs.

STANDARD 30 amp ESC Electronic Speed Controller can drive motors that consume up to 30A current. It works on 2-3S LiPo batteries. The onboard BEC provides regulated 5V(2A max draw) to power the flight controller and other onboard modules.