DRV8833 2 Channel DC Motor Driver
₹72.00 Incl. GSTDRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages.
EASY DRIVER STEPPER MOTOR
₹127.00 Incl. GSTIt is a simple to use stepper motor driver, compatible with most microcontrollers that can output a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The module requires a 7V to the 30V power supply for a motor. The module has an onboard voltage regulator for the digital interface that can be set to 5V or 3.3V.
EASY DRIVER STEPPER MOTOR
₹127.00 Incl. GSTIt is a simple to use stepper motor driver, compatible with most microcontrollers that can output a digital 0 to 5V pulse (0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The module requires a 7V to the 30V power supply for a motor. The module has an onboard voltage regulator for the digital interface that can be set to 5V or 3.3V.
HG7881 4-Channel DC 2.4-10V Motor Driver Broad
₹125.00 Incl. GSTThis HG7881 4-Channel dc motor driver module comes with its own four L9110S chip. It can drive 4 DC or Can drive two 4-wire 2-phase stepping motor.
HIGH POWER ROBOT SMART CAR MOTOR DRIVER BTS
₹289.00 Incl. GSTThe Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI.
L293D MOTOR DRIVER BOARD SHIELD
₹118.00 Incl. GSTThe L293D Motor Driver/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project.
L293D MOTOR DRIVER IC
₹118.00 Incl. GSTL293D PowerDIP-16 Stepper Motor Controller/ Driver is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors.
L298N MOTOR DRIVER BOARD
₹108.00 Incl. GSTThis L298N Based Motor Driver Module – 2A is a high power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L298 motor driver IC and has the onboard 5V regulator which it can supply to an external circuit. It can control up to 4 DC motors, or 2 DC motors with directional and speed control
L298P Motor Driver Shield for Arduino
₹408.00 Incl. GSTThe L298P Motor Driver Shield for Arduino is probably one of the most versatile on the market and features an onboard male header for an ultrasonic sensor connected to digital pins D7 & D8, female header for the Bluetooth module, servo header connected to pin D9, male headers connected to PWM pins D3, D5, D6. That makes it a great shield for any robotic project.
L9110S DC Stepper Motor Driver Board
₹53.00 Incl. GSTThis tiny module has two independent L9110S motor driver chips which can each drive up to 800mA of continuous current. The boards can be operated from 2.5V to 12V enabling this module to be used with both 3.3V and 5V microcontrollers.
MA860H STEPPER DRIVER
₹6,800.00 Incl. GSTIt is a high-performance stepper driver implemented with pure-sinusoidal current control technology. The MA860H Digital Stepper Motor Driver 50-110 VDC with 1.8-7.5A can be used to drive 2-phase or 4-phase motors(from “NEMA 17” or “NEMA 34” size)with less noise and heat. And it can provide better performances at high speed than most of the drivers in the markets.
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
₹799.00 Incl. GSTMonster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A) is essentially a ramped-up version of our Ardumoto motor driver shield. For this Monster Moto Shield, we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.