1000 MM long Chrome Plated Smooth Rod Diameter 8 MM
₹459.00 Incl. GSTThese are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.
In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.
2 Meter GT2 Timing Belt + 2Pcs of GT2 pulley (20 teeth)
₹493.00 Incl. GSTThis is 2 Meter GT2 Timing Belt + 2Pcs of GT2 pulley (20 teeth).
The Pulley and The Timing Belt combo forms an integral part of the 3-D printer. These are used for the precision motion to print even the most intricate designs. GT2 Timing Belt Pulley is widely used in the 3d printer. GT2 Timing Belt pulley Specially design for NEMA 17 stepper motor used in 3d Printer.
2004 LCD Display RepRapDiscount Smart Controller with Adapter
₹576.00 Incl. GSTThe 2004 LCD Display RepRapDiscount Smart Controller with Adapter contains an SD-Card reader, a rotary encoder and a 2004 LCD display. You can easily connect it to your RAMPS board using the “smart adapter”.
2020 aluminum extrusion
₹660.00 Incl. GSTFeatures:
- Cost-effectiveness
- Resistance to corrosion
- High strength-to-weight ratio
- Variety of size and shapes
- Thermal adaptability
- Electrical and thermal conductivity
3000M GT2 Width 6mm Black Open Timing Belt For 3D Printer
₹71.00 Incl. GSTHighest quality precision 3000M GT2 Width 6mm Black Open Timing Belt For 3D Printer. Made from NEOPRENE – Synthetic Rubber reinforced with fiberglass cords for superior strength. Neoprene – an oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930.
300mm Trapezoidal 4 Start Lead Screw 8mm Thread
₹199.00 Incl. GSTThe 300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.
It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.
320MM long Chrome Plated Smooth Rod Diameter 8 MM
₹173.00 Incl. GSTThese are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.
In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.
380 MM long Chrome Plated Smooth Rod Diameter 8 MM
₹229.00 Incl. GSTThese are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.
In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.
400 MM long Chrome Plated Smooth Rod Diameter 8 MM
₹190.00 Incl. GSTThese are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.
In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.
400mm Trapezoidal 4 Start Lead Screw 8mm
₹240.00 Incl. GSTThe 400mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.
It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.
500 MM long Chrome Plated Smooth Rod Diameter 8 MM
₹304.00 Incl. GST500 MM long Chrome Plated Smooth Rod Diameter 8 MM used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired with linear bearings. These smooth rods are manufactured for use in 3D printers, Hydraulics as well as in CNC / linear motion applications, are stand up to frequent use without a problem.
In the robotics field, these smooth metal rods are usually used on the axis for 3D printers or CNC engraving machines to slide on. This rod comes in various lengths and body diameters, we made it available for our Makers.
500mm Trapezoidal 4 Start Lead Screw 8mm Thread
₹288.00 Incl. GSTThe 500mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printing.
It has good wear resistance and strength, high accuracy, hard to rust and has good performances due to low friction coefficients and long usage spans. This Trapezoidal Lead Screw with Copper Nut is a new type of screw that is mainly used in stepper motor, machine tool rails and other types of equipment.