This is a 150mm FrSky Receiver Antenna new version IPEX4. This Connector is used to connect the receiver.  the 2.4G control made it unique because it can connect most of the Receivers. This connector has RF113 silver plated wire for that reason this it is good precision machining also it has low loss and high sensitivity.

This is a 15cm 3DBI GSM/GPRS/3G PCB Antenna with IPEX13 Connector. This PCB/Sticker Antenna is a wireless device to receives and transmits signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.

This is a 2.4G 150mm Receiver Antenna regular version IPEX1. This Connector is used to connect the receiver.  the 2.4G control made it unique because it can connect most of the Receivers. The cable length of the connector is 150 mm and  This connector has RF113 silver plated wire for that reason this it is good precision machining also it has low loss and high sensitivity.

This 2.4GHz 3.2dBi RP-SMA female Omni antenna is intended for use for all 2.4GHz applications. The antenna is fitted with an RP-SMA female connector and a blade, made of a flexible material that can be rotated 360 degrees. Suitable for telemetry and WIFI transmissions on lightweight unmanned platforms.

This 2.4GHz 3.2dBi Gain indoor antenna provides high gain and provides tilt and swivel functions for full flexibility.

An antenna is a device to transmit and receive electromagnetic waves. Electromagnetic waves are often referred to as radio waves. Most antennas are resonant devices, which operate efficiently over a relatively narrow frequency band. Antennas can be designed to transmit and receive radio waves in all horizontal directions equally (omnidirectional antennas), or preferentially in a particular direction. Here you can get an antenna for UBlox NEO GPS model, Antenna Base Set and many more GPS modules.

This is PCB Antenna having a frequency of 2400–2483 MHz and  1.8dBi gain. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.

This is 2400–2500 MHz 3 dBi Sticker Antenna(V2.0).

This is PCB Antenna having a frequency of 2400–2500 MHz and  3dBi gain. PCB Antenna is a wireless device to receive and transmit signals, it has been widely used in telecommunication to communicate. One of the main reasons to use a PCB (printed circuit board) antenna is the reduced overall cost of the radio module.

This is Magnetic Mount Antenna having a frequency of 2400 – 2483 MHz and gain of 3dBi. This is very helpful for signal boosting. Magnetic mount antennas are commonly used for car and truck applications. The antenna’s magnetic base sticks securely to the metal of the vehicle. The metal surface of the car acts as a ground plane to bounce the signal. Since magnetic mount antennas require a ground plane, they should be mounted on metal.