The Raspberry Pi 3 Case for Raspberry Pi 3 Model B B+ only Red/Whiteis a 5-part Enclosure for Raspberry Pi 2 model B, B+, and Raspberry Pi B+. Official case for the Raspberry Pi from the Raspberry Pi Foundation.

It has removable Lid for easy access to the camera and display ports, Removable Side Panels with easy access to the GPIO port, removable Top Frame. This case has a very attractive strawberry red and white color. It is made up of ABS.

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad-core processor running at 1.4GHz, dual-band 2.4GHz, and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.

The secret sauce that makes this computer so small and powerful is the Broadcom BCM2837, an ARM Cortex-A53 64-bit Quad-Core Processor System-on-Chip operating at 1.4GHz. The GPU provides OpenGL ES 2.0, hardware-accelerated OpenVG and 1080p30 H.264 high-profile decode. It is capable of 1Gpixel/s, 1.5Gtexel/s or 24 GFLOPs of a general-purpose computer.

The Raspberry Pi 3 Model B builds upon the features of its predecessors with a new, faster processor on board to increase its speed. It also features Wi-Fi and Bluetooth low energy capabilities to enhance the functionality and the ability to power more powerful devices over the USB ports.

Key Features of Raspberry Pi 4 8GB:

Faster processing:

1. With one of latest Broadcom 2711; Quad-Core Cortex A72 (ARM V8-A)  64-bit SoC Clocked at  1.5GHz  processor improved power consumption; and thermals on the Pi 4+B means that the CPU on the BCM2837 SoC can now run at 1.5 GHz; a 20% increase on the previous Pi 3 model (which ran at 1.2GHz).
2. Video performance on Pi 4 B is upgraded with dual-display support at resolutions up to 4K via a pair of micro-HDMI ports; hardware video decode at up to 4Kp60 which supports H 265 Decode (4Kp60); H.264, and MPEG-4 decode (1080p60).

Faster wireless:

1. A significant change on the Pi 4 B compared to the previous Pi 3 models is the inclusion of a new faster; dual-band wireless chip with 802.11 b/g/n/ac wireless LAN.
2. The dual-band 2.4GHz and 5GHz wireless LAN enables faster networking with less interference and the new PCB antenna technology allow better reception.
3. Latest 5.0 Bluetooth allows you to use a wireless keyboard/trackpad with more range than before without extra dongles; keeping things nice and tidy.

Enhanced Ethernet Connectivity:

1. The Pi 4 B has significantly faster-wired networking with USB 3.0 technology; thanks to an upgraded USB/LAN chip; and you should see speeds that are 10x faster than on previous models of the Pi.
2. The GPIO header remains the same, with 40 pins; fully backwards-compatible with previous boards as on the previous three models of Pi. However; it should note that the new PoE header pins may contact components on the underside of some HATs; like Rainbow HAT. Some standoffs will prevent any mischief from occurring though!

This is a newly arrived very lightweight ABS case for Raspberry Pi 4 models. It is unassembled only 3-piece Smooth matt finished black ABS plastics case which provides adequate protection for your Pi and access to all the ports. The case is compatible with all the latest launched Raspberry pi 4 Models. It is very easy to assemble and de-assemble with accurately designed locking notches and 4 small screws to lock the case.

This case looks very premium with a round edge and accurate opening to each port of Pi 4.At the side, the case has a GPIO slot from which you can route GPIO and CSI ribbon cable and a cut-out to provide the ease with the micro SD card insertion and removal.

Keep your  Raspberry Pi 4 Model B safe and protected with this cheap but strong red-white Plastic case is made of strong plastic material designed for Pi 4B model. It will provide adequate protection for your Pi and access to all the ports. This case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads at the bottom to provide grip to the cabinet.

This five-Piece Case for Pi 4 is also designed so that you can see the smooth Pi status LEDs clearly from the rubber reflector provided to the case. With this case, you won’t need to put any effort into fitting the Pi inside the case as well as opening and closing of a case is not complicated as an acrylic one.  It fits the pi accurately just like the mobile phone cover.

Keep your  Raspberry Pi 4 Model B safe and protected with this cheap but strong red-white Plastic case is made of strong plastic material designed for Pi 4B model. It will provide adequate protection for your Pi and access to all the ports. This Raspberry Pi 4 case comes with a Raspberry LOGO engraved on the white top of the cover and Rubber pads at the bottom to provide grip to the cabinet.

This five-Piece Case for Pi 4 is also designed so that you can see the smooth Pi status LEDs clearly from the rubber reflector provided to the case.