This is CJMCU 9930 APDS-9930 Digital Proximity And Ambient Light Sensor For Arduino. The APDS-9930 provides digital ambient light sensing (ALS), IR LED and a complete proximity detection system in a single 8 pin package. The proximity function offers plug and play detection to 100 mm (without front glass) thus eliminating the need for factory calibration of the end equipment or sub-assembly.

The proximity detection feature operates well from bright sunlight to dark rooms. The wide dynamic range also allows for operation in short distance detection behind dark glass such as a cell phone.

Key Point:

• Great kit for early beginners to learn about Arduino.
• Best kit for learning about Arduino Programing.
• No soldering skill is required, it’s come with a high-quality Breadboard and jumper’s wire.

Features:

• The best starter kit for beginners.
• We offer the different-different types of components, you can create your own projects.
• Easy to learn microcontroller using sunduino boards.
• Easy application programming using open-source IDE.

  Package includes:

  • 1 x Arduino Uno R3 SMD board  
  • 1 x  USB Cable for Arduino board
  • 1 x  830 point BreadBoard 
  • 1 x 15pcs led (Red, Green, Yellow)
  • 1 x potentiometer
  • 1 x active buzzer
  • 1 x passive buzzer
  • 1 x74HC595N
  • 1 x Infrared receiving head
  • 1 x LM35DZ
  • 1 x Flame sensor
  • 2 x Roll Ball Switch
  • 3 x 5mm LDR
  • 5 x Button Switch with Capx 1
  • 1 x IR remote control
  • 1 x one digital tube
  • 1 x four digital tube
  • 1 x8*8 dot matrix tube
  • 1 x UNL2003 driver board
  • 1 x 5V stepper motor
  • 1 x SG90
  • 1 x LCD1602 IIC I2C x 1
  • 1 x DHT11 Temperature and Humidity sensor module
  • 1 x Water level measurement module
  • 1 x RFID module
  • 1 x RFID key ring
  • 1 x RFID card
  • 1 x sound sensor module
  • 1 x one road relay module
  • 1 x RTC module
  • 1 x 16 buttons matrix keyboard module
  • 1 x RGB three-color module
  • 1 x 9V Battery Connector
  • 65 x Jumper Wire
  • 10 x pin Dupont line(male to a female)

Features:

1. It Brings a Machine learning vision to your life.
2. Equipped with a powerful microcontroller board.
3. Equipped with a wide variety of sensors.
4. Easy to attach your components and create your very own unique TinyML project.
5. The board can sense movement, acceleration, rotation, temperature, humidity, barometric pressure, sounds, gestures, proximity, color, and light intensity, etc.

Features:

1. 32-bit development board, being previously based on 8-bit AVR
2. The board features the standard 14 digital I/O ports, 6 analog channels
3. dedicated pins for I²C, SPI and UART connections.
4. Larger memory:
   1. 8 times more flash memory (256 kB)
5. 16 times more SRAM (32 kB).
6. Easy power management:
   1. The UNO R4 has a barrel jack connector and supports input voltages from 6-24 V.
7. This connector is widely popular and removes the need for additional circuitry required to step down the voltage.
8. Cross compatibility:
   1. The UNO form factor automatically makes it compatible with hundreds of existing third-party shields
      and other accessories.

Features:

1. The UNO R4 is now a 32-bit Microcontroller board, being previously based on 8-bit AVR
2. The board features 14 digital I/O ports, 6 analog channels
3. Dedicated pins for I2C, SPI and UART connections.
4. It has a significantly larger memory:
   1. 8 times more flash memory (256 kB)
   2. 16 times more SRAM (32 kB).
5. Fastest  48 MHz clock Speed. It is 3x faster than its predecessors.
6. Onboard ESP32-S3 module for Wi-Fi & Bluetooth connectivity,
7. Onboard 12×8 LED matrix
   1. Making one of the most visually unique Arduino boards to date.
   2. The LED matrix is fully programmable, where you can load anything from still frames to custom animations.

Features:

1. Power Supply: 5VDC
2. This breakout PCB facilitates using the BME680 sensor, especially on solderless breadboards!
3. Sturdy (1.6mm), purple PCB with a 6-pin header on on side (VCC, GND, SDA/SDI, SCL/SCK, SDO, and CS)
4. 6-Pin header included (soldering needed!)

The device will operate at the only 0.3uA meaning low current draw for battery-powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull-ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.

Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation.

1. Acrylic Body.
2. Easy to install.
3. Attractive blue color.