CC3000 WIFI SHIELD
₹1,850.00 Incl. GST
- Arduino, Crowduino, Seeeduino, Arduino Mega and Crowduino Mega compatible
- Support SD card 2GB and 4GB
- Wireless network processor
-
- IEEE 802.11 b/g ( 2.4GHz)
- Embedded IPv4 TCP/IP stack
-
- Best-in-class radio performance
-
- TX power: +18.0 dBm at 11 Mbps, CCK
- RX sensitivity: –88 dBm, 8% PER, 11 Mbps
-
- Works with low MIPS and low-cost MCUs with compact memory footprint
-
- Small code size (Flash and RAM) required for MCU
-
- FCC, IC, CE and TELEC certified reference design with a chip antenna
- Integrated crystal and power management
- Small form factor
-
- 16.3 mm × 13.5 mm × 2 mm
-
- Operating temperature: –20°C to 70°C
- SmartConfig technology enables simple Wi-Fi configuration using a smartphone, tablet or PC
- Proven Wi-Fi interoperability; based on TI’s seventh generation of proven Wi-Fi solutions
- Complete platform solution including user and porting guides, API guide, sample applications, and support community
This is a shield for the CC3000 WiFi Module. The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that makes incorporating internet connectivity into your project simple.
Supply Voltage: 4.5V – 12V Host Interface: SPI @ 16MHZ Throughput (TCP): ~4Mbps
IEEE 802.11 b/g Compliant WEP, WPA/WPA2 (AES and TKIP – Personal) Security Modes
This shield even provides an optional feature that allows you to attach an external antenna, just in case you need a little extra power.
he CC3000 Shield has a standard Arduino shield layout with 2 rows of pins on either side.
| Required Code size |
As low as 5KB Flash & 360B RAM |
|---|---|
| Host Interface |
SPI at 16MHz |
| Power Modes |
Active Mode (92mA typ RX current), Shutdown Mode (<5uA) |
| Power Supply |
2.9V – 4.8V |
| I/O Voltage |
1.8V – 3.6V |
| Connections |
4 Sockets (UDP or TCP) (TCP) ~4 Mbps* |
Reviews
Clear filtersThere are no reviews yet.